Villeret Perpetual Calendar 40 TPD & Winder Settings | Swiss Watch Store

An automatic like the Blancpain Villeret Perpetual Calendar 40 only stays accurate while its mainspring holds charge. This model carries reference 5453. It is powered by the Cal. 1153 movement. Set your winder to the figures below and the Villeret Perpetual Calendar 40 stays wound, accurate and ready to pick up.

TPD and Winding Direction

The correct setting for the Villeret Perpetual Calendar 40 is 650 turns per day, clockwise: 650 turns per day with the rotor turning clockwise.

Turns per day (TPD)	650
Rotation direction	Clockwise
Movement	Cal. 1153

Why the Correct Setting Matters

Too few turns and the Villeret Perpetual Calendar 40 stops between wears; the right figure keeps the mainspring in its sweet spot, where the movement runs most consistently. And there is no risk in experimenting: a modern automatic cannot be overwound on a winder, because the mainspring's slipping bridle releases excess tension. Getting the setting right is about convenience and accuracy, never about avoiding damage.

Choosing a Watch Winder for the Villeret Perpetual Calendar 40

The key feature to shop for is programmability: independent TPD and direction controls that cover 650 TPD clockwise. Single-watch winders are ideal if the Villeret Perpetual Calendar 40 flies solo; multi-watch winders make sense the moment you own two or more automatics. Our watch winder collection covers both.

Villeret Perpetual Calendar 40 Winder FAQs

What's the correct TPD setting for the Villeret Perpetual Calendar 40?

The Villeret Perpetual Calendar 40 is specified at 650 turns per day. Most programmable winders offer this as a standard preset.

Which winding direction should I use?

Clockwise — set the winder to rotate in the clockwise direction only.

Can I use any watch winder for my Villeret Perpetual Calendar 40?

Yes — provided it's programmable. Verify the winder offers 650 turns per day with clockwise rotation before buying; fixed-setting winders may not match.