Villeret Ultraplate 40 TPD & Winder Settings | Swiss Watch Store
The Blancpain Villeret Ultraplate 40 is an automatic watch: it winds itself from the motion of your wrist, but on the days it sits unworn a watch winder keeps the mainspring topped up. This model carries reference 6223A. It is powered by the Cal. 1151 movement. Below you'll find the exact TPD setting and winding direction the Villeret Ultraplate 40 needs.
TPD and Winding Direction
The correct setting for the Villeret Ultraplate 40 is 650 turns per day, clockwise: 650 turns per day with the rotor turning clockwise.
| Turns per day (TPD) | 650 |
| Rotation direction | Clockwise |
| Movement | Cal. 1151 |
Why the Correct Setting Matters
The correct TPD mirrors what your wrist would do naturally across a normal day. It holds the mainspring at a healthy charge so the Villeret Ultraplate 40 runs at its best and is ready to wear at a moment's notice — exactly what a watch winder is for.
Don't worry if you're unsure — you can't break a modern automatic with the wrong winder setting; the slipping bridle on the mainspring makes overwinding impossible. The right setting just keeps everything running at its best.
Choosing a Watch Winder for the Villeret Ultraplate 40
For the Villeret Ultraplate 40, look for a programmable winder offering a 650 TPD clockwise programme. One watch? A single winder. Two or more automatics? A double or triple winder keeps the whole rotation ready. You'll find suitable models in our watch winder collection — check the programme list before you buy.
Villeret Ultraplate 40 Winder FAQs
What's the correct TPD setting for the Villeret Ultraplate 40?
The Villeret Ultraplate 40 is specified at 650 turns per day. Most programmable winders offer this as a standard preset.
Which winding direction should I use?
Clockwise — set the winder to rotate in the clockwise direction only.
Can I use any watch winder for my Villeret Ultraplate 40?
Yes — provided it's programmable. Verify the winder offers 650 turns per day with clockwise rotation before buying; fixed-setting winders may not match.