Superocean Heritage Chronographe 44 TPD & Winder Settings | Swiss Watch Store
Correct winder settings are the difference between a watch that is ready to wear and one that has stopped overnight. For the Breitling Superocean Heritage Chronographe 44, programme your winder as follows.
TPD and winding direction for the Superocean Heritage Chronographe 44
The winding specification for the Superocean Heritage Chronographe 44 is 800 turns per day (TPD) in the clockwise direction. Enter both into your winder's settings and you are done.
Why the correct setting matters
An automatic watch is only as accurate as its power reserve allows. Keep the mainspring properly tensioned and the Superocean Heritage Chronographe 44 will hold its rate and be ready to wear the instant you pick it up — no fiddling with the time and date. Set the TPD too low and the watch can run down between wears. The movement will not be damaged (modern automatics have a slipping mainspring that prevents overwinding), but an under-wound watch is simply not doing its job. Correct settings are about accuracy and readiness, not safety.
Choosing a watch winder for the Superocean Heritage Chronographe 44
The key feature to shop for is programmability: independent TPD and direction controls that cover 800 TPD clockwise. Single-watch winders are ideal if the Superocean Heritage Chronographe 44 flies solo; multi-watch winders make sense the moment you own two or more automatics. Our watch winder collection covers both.
Frequently asked questions
What TPD does the Superocean Heritage Chronographe 44 need?
The Superocean Heritage Chronographe 44 requires 800 turns per day (TPD). Programme this exact figure into your winder for the best results.
Which winding direction should I use for the Superocean Heritage Chronographe 44?
Set the rotation to clockwise — that matches how this calibre winds.
Will any automatic watch winder work with my Superocean Heritage Chronographe 44?
It needs to be a programmable winder covering 800 TPD with clockwise rotation. Most modern winders do — just confirm both settings are available.