C1 Bel Canto TPD & Winder Settings | Swiss Watch Store

Left unworn, the Christopher Ward C1 Bel Canto will run down within a couple of days — a correctly set watch winder stops that happening. This model carries reference C01-41APT2. It is powered by the Calibre FS01 (SW200-1 base) movement. Here is the TPD and direction this model calls for.

TPD and Winding Direction

The correct setting for the C1 Bel Canto is 650 turns per day, bidirectional: 650 turns per day with the rotor turning in both directions.

Turns per day (TPD)	650
Rotation direction	Bidirectional
Movement	Calibre FS01 (SW200-1 base)

Why the Correct Setting Matters

Too few turns and the C1 Bel Canto stops between wears; the right figure keeps the mainspring in its sweet spot, where the movement runs most consistently. And there is no risk in experimenting: a modern automatic cannot be overwound on a winder, because the mainspring's slipping bridle releases excess tension. Getting the setting right is about convenience and accuracy, never about avoiding damage.

Choosing a Watch Winder for the C1 Bel Canto

For the C1 Bel Canto, look for a programmable winder offering a 650 TPD bidirectional programme. One watch? A single winder. Two or more automatics? A double or triple winder keeps the whole rotation ready. You'll find suitable models in our watch winder collection — check the programme list before you buy.

C1 Bel Canto Winder FAQs

What's the correct TPD setting for the C1 Bel Canto?

The C1 Bel Canto is specified at 650 turns per day. Most programmable winders offer this as a standard preset.

Which winding direction should I use?

Bidirectional — the winder should rotate in both clockwise and anticlockwise directions.

Can I use any watch winder for my C1 Bel Canto?

Yes — provided it's programmable. Verify the winder offers 650 turns per day with bidirectional rotation before buying; fixed-setting winders may not match.