Conquest 1958: L1.611.6.78.1 TPD & Winder Settings | Swiss Watch Store
If your Longines Conquest 1958: L1.611.6.78.1 keeps stopping between wears, the fix is usually simple: it needs consistent winding at the right rate. Modern automatics are designed to stay charged through a mix of wrist time and winder time. Use the settings below to keep your Conquest 1958: L1.611.6.78.1 running and accurate around the clock.
Winder settings for the Conquest 1958: L1.611.6.78.1
Set your winder to 650 turns per day with a bidirectional (rotating both ways) rotation. That is the combination this model is designed for. Most programmable winders let you select both the TPD and the rotation mode, so matching these figures is straightforward.
The point of precise winding
It comes down to readiness and accuracy. A Conquest 1958: L1.611.6.78.1 kept at its ideal TPD maintains a full power reserve, which is when automatic movements run most consistently. Let the reserve run down and the watch stops — then it is the familiar ritual of resetting everything. One thing not to worry about: an incorrect winder setting cannot damage a modern automatic watch. The slipping mainspring guards against overwinding, so getting the setting right is about performance and convenience, not safety.
Picking your winder
Keep it simple: choose a programmable winder, enter the TPD and direction above, and your Conquest 1958: L1.611.6.78.1 takes care of itself. Capacity is the only real decision — a single-watch winder if this is your main piece, a two- or four-watch model if you like to rotate. All the winders you need are in our watch winder collection.
Frequently asked questions
What TPD does the Conquest 1958: L1.611.6.78.1 need?
650 turns per day is the setting to use, with the winder in bidirectional (rotating both ways) mode.
Which winding direction should I use for the Conquest 1958: L1.611.6.78.1?
Wind it bidirectional (rotating both ways). Getting the direction right keeps the rotor working efficiently.
Will any automatic watch winder work with the Conquest 1958: L1.611.6.78.1?
A programmable winder is recommended — it lets you match the exact TPD and direction this watch needs.