Conquest Automatic: L1.134.4.96.6 TPD & Winder Settings | Swiss Watch Store
The Longines Conquest Automatic: L1.134.4.96.6 deserves better than sitting dead in a box between wears, which thrives on regular, correctly measured winding. Set your winder to the figures on this page and your Conquest Automatic: L1.134.4.96.6 will be wound, accurate and ready whenever you reach for it.
Turns per day and winding direction
The Conquest Automatic: L1.134.4.96.6 requires 650 turns per day, winding bidirectional (rotating both ways). Getting both numbers right matters: the TPD figure keeps the mainspring at a healthy level of charge, while the direction ensures the rotor engages efficiently rather than spinning freely.
What correct winding actually buys you
Two things: a watch that is ready, and a watch that is right. A Conquest Automatic: L1.134.4.96.6 held at its proper TPD stays wound between wears, so there is no resetting the time and date every few days, and the movement runs within its best rate. Modern automatics cannot be harmed by an incorrect setting — the slipping mainspring bleeds off excess winding — but only the correct setting keeps the watch performing as designed.
Which winder should you buy?
For the Conquest Automatic: L1.134.4.96.6, the key feature is programmability: the winder must let you set the TPD figure and rotation direction listed on this page. Beyond that, it is a question of capacity. One watch? A single winder does the job beautifully. Several automatics? A multi-watch winder saves you configuring each piece separately. Take a look at our watch winder collection for options at every capacity.
Frequently asked questions
What is the correct winder setting for the Conquest Automatic: L1.134.4.96.6?
The Conquest Automatic: L1.134.4.96.6 needs 650 turns per day. Set this on a programmable winder for the best results.
What rotation direction does the Conquest Automatic: L1.134.4.96.6 need?
Use bidirectional (rotating both ways) winding. This matches how the movement's rotor is designed to engage.
Do I need a programmable winder?
Any winder that lets you set 650 turns per day and bidirectional (rotating both ways) rotation will work. Programmable models are the safest choice.