Luminor Marina 44 TPD & Winder Settings | Swiss Watch Store
The Panerai Luminor Marina 44 is built to be worn, but on the days it rests in a drawer it relies on you and its Cal. P.9010 to keep the mainspring charged, reference PAM01312 . A watch winder set to the correct TPD and rotation direction does exactly that. Below you will find the precise settings for this model, plus advice on choosing a suitable winder.
Turns per day and winding direction
The Luminor Marina 44 requires 725 turns per day, winding bidirectional (rotating both ways). Getting both numbers right matters: the TPD figure keeps the mainspring at a healthy level of charge, while the direction ensures the rotor engages efficiently rather than spinning freely.
What correct winding actually buys you
Two things: a watch that is ready, and a watch that is right. A Luminor Marina 44 held at its proper TPD stays wound between wears, so there is no resetting the time and date every few days, and the movement runs within its best rate. Modern automatics cannot be harmed by an incorrect setting — the slipping mainspring bleeds off excess winding — but only the correct setting keeps the watch performing as designed.
Which winder should you buy?
For the Luminor Marina 44, the key feature is programmability: the winder must let you set the TPD figure and rotation direction listed on this page. Beyond that, it is a question of capacity. One watch? A single winder does the job beautifully. Several automatics? A multi-watch winder saves you configuring each piece separately. Take a look at our watch winder collection for options at every capacity.
Frequently asked questions
What TPD does the Luminor Marina 44 need?
725 turns per day is the setting to use, with the winder in bidirectional (rotating both ways) mode.
Which winding direction should I use for the Luminor Marina 44?
Wind it bidirectional (rotating both ways). Getting the direction right keeps the rotor working efficiently.
Will any automatic watch winder work with the Luminor Marina 44?
A programmable winder is recommended — it lets you match the exact TPD and direction this watch needs.