Luminor Marina 44 TPD & Winder Settings | Swiss Watch Store
The Panerai Luminor Marina 44 is an automatic watch: it winds itself from the motion of your wrist, but on the days it sits unworn a watch winder keeps the mainspring topped up. This model carries reference PAM01312. It is powered by the Cal. P.9010 movement. Below you'll find the exact TPD setting and winding direction the Luminor Marina 44 needs.
TPD and Winding Direction
The correct setting for the Luminor Marina 44 is 725 turns per day, bidirectional: 725 turns per day with the rotor turning in both directions.
| Turns per day (TPD) | 725 |
| Rotation direction | Bidirectional |
| Movement | Cal. P.9010 |
Why the Correct Setting Matters
The correct TPD mirrors what your wrist would do naturally across a normal day. It holds the mainspring at a healthy charge so the Luminor Marina 44 runs at its best and is ready to wear at a moment's notice — exactly what a watch winder is for.
Don't worry if you're unsure — you can't break a modern automatic with the wrong winder setting; the slipping bridle on the mainspring makes overwinding impossible. The right setting just keeps everything running at its best.
Choosing a Watch Winder for the Luminor Marina 44
For the Luminor Marina 44, look for a programmable winder offering a 725 TPD bidirectional programme. One watch? A single winder. Two or more automatics? A double or triple winder keeps the whole rotation ready. You'll find suitable models in our watch winder collection — check the programme list before you buy.
Luminor Marina 44 Winder FAQs
What's the correct TPD setting for the Luminor Marina 44?
The Luminor Marina 44 is specified at 725 turns per day. Most programmable winders offer this as a standard preset.
Which winding direction should I use?
Bidirectional — the winder should rotate in both clockwise and anticlockwise directions.
Can I use any watch winder for my Luminor Marina 44?
Yes — provided it's programmable. Verify the winder offers 725 turns per day with bidirectional rotation before buying; fixed-setting winders may not match.