Datejust 41 TPD & Winder Settings | Swiss Watch Store

Datejust 41 — Winder Setting Overview

Looking for the correct winder setting for your Rolex Datejust 41? You've come to the right place. The Datejust 41 runs on the Calibre 3235 calibre. Programme the figures below into any programmable winder and your watch will stay wound, accurate and ready to wear.

TPD and Winding Direction

Your winder needs one programme: 650 turns per day, bidirectional. On most programmable winders this is a single preset — select it, place the watch on the cuff, and let it run.

Why the Correct Setting Matters

Think of the right setting as cruise control for your power reserve. It keeps the mainspring at full charge so the Datejust 41 holds accurate time and never stops between wears, saving you the daily reset ritual.

A quick myth-buster: wrong winder settings don't damage modern automatics. The mainspring's slipping bridle caps the tension, so the worst case is a watch that runs down. Dial in the correct TPD for accuracy and convenience.

Choosing a Watch Winder for the Datejust 41

The key spec is programmability: your winder must let you dial in 650 turns per day winding in both directions. Single winders suit a one-watch collection; multi-watch winders suit a rotation. Explore our watch winder collection and pick a unit with individual TPD and direction controls.

Datejust 41 Winder FAQs

What TPD does the Datejust 41 need?

The Datejust 41 needs 650 turns per day. Set your winder accordingly and the mainspring will stay at full charge.

Should the winder rotate clockwise, anticlockwise or both?

Set your winder to wind both ways. The Datejust 41 winds bidirectionally, so the both-directions (CW + CCW) programme is correct.

Do I need a special winder for the Datejust 41?

Any decent programmable winder will do the job. The two things to check are a 650 TPD programme and a bidirectional direction option.