Black Bay GMT TPD & Winder Settings | Swiss Watch Store
An automatic like the Tudor Black Bay GMT only stays accurate while its mainspring holds charge. This model carries reference M79830RB. It is powered by the MT5652 movement. Set your winder to the figures below and the Black Bay GMT stays wound, accurate and ready to pick up.
TPD and Winding Direction
The correct setting for the Black Bay GMT is 650 turns per day, bidirectional: 650 turns per day with the rotor turning in both directions.
| Turns per day (TPD) | 650 |
| Rotation direction | Bidirectional |
| Movement | MT5652 |
Why the Correct Setting Matters
Too few turns and the Black Bay GMT stops between wears; the right figure keeps the mainspring in its sweet spot, where the movement runs most consistently. And there is no risk in experimenting: a modern automatic cannot be overwound on a winder, because the mainspring's slipping bridle releases excess tension. Getting the setting right is about convenience and accuracy, never about avoiding damage.
Choosing a Watch Winder for the Black Bay GMT
The key feature to shop for is programmability: independent TPD and direction controls that cover 650 TPD bidirectional. Single-watch winders are ideal if the Black Bay GMT flies solo; multi-watch winders make sense the moment you own two or more automatics. Our watch winder collection covers both.
Black Bay GMT Winder FAQs
What's the correct TPD setting for the Black Bay GMT?
The Black Bay GMT is specified at 650 turns per day. Most programmable winders offer this as a standard preset.
Which winding direction should I use?
Bidirectional — the winder should rotate in both clockwise and anticlockwise directions.
Can I use any watch winder for my Black Bay GMT?
Yes — provided it's programmable. Verify the winder offers 650 turns per day with bidirectional rotation before buying; fixed-setting winders may not match.