Modello Uno U1S TPD & Winder Settings | Swiss Watch Store

Left unworn, the Unimatic Modello Uno U1S will run down within a couple of days — a correctly set watch winder stops that happening. This model carries reference U1S. It is powered by the Sellita SW200-1 movement. Here is the TPD and direction this model calls for.

TPD and Winding Direction

The correct setting for the Modello Uno U1S is 650 turns per day, bidirectional: 650 turns per day with the rotor turning in both directions.

Turns per day (TPD)	650
Rotation direction	Bidirectional
Movement	Sellita SW200-1

Why the Correct Setting Matters

Too few turns and the Modello Uno U1S stops between wears; the right figure keeps the mainspring in its sweet spot, where the movement runs most consistently. And there is no risk in experimenting: a modern automatic cannot be overwound on a winder, because the mainspring's slipping bridle releases excess tension. Getting the setting right is about convenience and accuracy, never about avoiding damage.

Choosing a Watch Winder for the Modello Uno U1S

For the Modello Uno U1S, look for a programmable winder offering a 650 TPD bidirectional programme. One watch? A single winder. Two or more automatics? A double or triple winder keeps the whole rotation ready. You'll find suitable models in our watch winder collection — check the programme list before you buy.

Modello Uno U1S Winder FAQs

What's the correct TPD setting for the Modello Uno U1S?

The Modello Uno U1S is specified at 650 turns per day. Most programmable winders offer this as a standard preset.

Which winding direction should I use?

Bidirectional — the winder should rotate in both clockwise and anticlockwise directions.

Can I use any watch winder for my Modello Uno U1S?

Yes — provided it's programmable. Verify the winder offers 650 turns per day with bidirectional rotation before buying; fixed-setting winders may not match.